China Best Sales KCB Gear Oil Cast Steel Two Stage Water Ring Vacuum Pump vacuum pump for ac

Product Description

KCB gear oil pump is mainly used to transport lubricating oil in the lubrication system of various mechanical equipment, and can transport non-lubricating oil, beverages, and low-corrosive liquids. It is suitable for transporting lubricating oil that does not contain CZPT particles and fibers, is non-corrosive, the temperature is not higher than 80°C, and the viscosity is 5×10-6~1.5×10-3m2/s (5-1500cSt) or lubricating oil with similar properties. other liquids. KCB gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. Equipped with copper gears, it can transport low flash point liquids, such as gasoline, benzene, etc.

Product Show

Product Description

Scope of application:
• Can be used as transmission and booster pump in oil delivery system;
• It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
• Can be used as a hydraulic pump to provide hydraulic power in hydraulic transmission systems;
• Can be used as lubricating oil pump in all industrial fields

KCB Type Gear Oil Pumo Features:
• No wear on the tooth surface, smooth operation, no trapped liquid, low noise, long life and high efficiency.
• This pump breaks away from the constraints of traditional design and takes gear pumps into a new field in design, production and use.
• The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range.

KCB series gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. The gears have been heat-treated to have higher hardness and strength, and are installed together with the shaft in a replaceable sleeve to run. Lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.

There are well-designed oil drain and oil return grooves in the pump. The gears bear less torque during operation, so the bearing load is small, the wear is small, and the pump efficiency is high.

The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used as a pressure reducing valve for a long time and can be installed separately on the pipeline if necessary.

When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.

Product Parameters

Product Name KCB series gear oil pump
Flow 1.1~576 m3/h
Speed 800~1400 r/min
EFF 45~60 %
pressure 0.6~1.45 Mpa
NPSHr 5~8 m
Power 1.5~250 KW
Voltage 220V, 240V, 380V, 400V, 415V, 440V, 460V,  50hz/60hz


Model Aperture
Self priming
Equipped with three-phase asynchronous motor
Power(KW) Speed(r/min) Type
KCB18.3 Φ18 18.3 1.45 5 44 1.5 1420 Y90L-4
KCB33.3 Φ18 33.3 1.45 5 44 2.2 1420 Y100L1-4
 KCB55 Φ25 55 0.33 7 39 1.5 1420 Y90L-4
KCB83.3 Φ40 83.3 0.33 7 40 2.2 1420 Y100L1-4
KCB200 Φ50 200 0.33 5 41 4 1440 Y112M-4
KCB300 Φ80 300 0.36 4.5 42 5.5 960 Y132M2-6
KCB483.3 Φ80 483.3 0.36 5 43 11 1440 Y160M-4
KCB633 Φ100 633 0.28 6 43 11 970 Y100L-6
KCB960 Φ100 960 0.28 6.5 43 18.5 1470 Y180M-4

Related keywords

Oil Gear Pump Oil Transfer Pump Crude Oil Pump Lube Oil Pump
Gear Oil Pump Gear oil pump with motor Best gear oil pump boat gear oil pump
gear oil pump china gear oil pump for boat gear oil pump for sale KCB Gear Pump

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online After-Sales Service
Warranty: 3years
Mesh Form: Internal Engaged
US$ 259/Piece
1 Piece(Min.Order)


Order Sample



.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

Vacuum Pump

How to check the vacuum pump

A vacuum pump is a machine that draws gas molecules from a volume and maintains a partial vacuum. Its main job is to create a relative vacuum within the stated capabilities. If your vacuum pump isn’t working properly, it may need service. Read on to learn more about the types of vacuum pumps and how to check them.

Principle of industrial vacuum pump

Industrial vacuum pumps are used in industrial processes that require vacuum. These pumps are designed to generate, improve and maintain vacuum. Learn about the different types of industrial vacuum technology. You can start by reading about the most common types of industrial vacuum pumps. These pumps can be used in a variety of industrial processes from cleaning to manufacturing.
Regardless of the technology used to manufacture these pumps, the basic principles behind their operation are the same. The speed and mass flow of the pump will determine its capacity and suitability. A faster flow rate will minimize the time it takes for the machine to empty. Another important factor to consider is the type of vacuum you need.
A liquid ring vacuum pump is an industrial pump that uses a ring of liquid to form a seal. This type of pump is best suited for applications with high vapor loads and high liquid carry-over. Liquid ring vacuum pumps can be divided into two categories: liquid ring vacuum pumps and scroll vacuum pumps.
Industrial vacuum pumps work by removing gas molecules from a chamber. The partial vacuum created allows material to flow through the void. As more molecules are removed, the pressure in the chamber decreases, releasing energy that can be used for a variety of different purposes.
The most common use of industrial vacuum pumps is for electric lights. In these lamps, a vacuum pump removes the gas, causing the bulb to light up. Energy from the vacuum is also used in aircraft to power instruments. In addition to powering industrial vacuum cleaners, they are used in a variety of other environments.
High-performance industrial vacuum systems require specific materials that can withstand extreme pressure. This means that the materials used in these systems need to be properly checked. They must also be free of organic debris and other contaminants before they can be safely placed in the chamber.

Types of vacuum pumps

There are various types of vacuum pumps. Which one to choose should depend on the purpose of the pump and the degree of vacuum that must be achieved. It is mainly divided into three categories: rough vacuum or low vacuum, high vacuum and ultra-high vacuum. They all have varying degrees of scarcity. The higher the pressure, the fewer molecules per cubic centimeter. This in turn improves vacuum quality.
The vacuum pump is critical to the operation of the vacuum system. These devices are divided into three main categories according to their working pressure range. These pumps have different characteristics and technologies that make them ideal for specific applications. The choice of vacuum pump required for a particular application depends on how much vacuum you need, and how much power you are willing to spend.
Vacuum pumps are used in a variety of industrial and scientific processes. Their main function is to remove gas molecules from the sealed volume, leaving a partial vacuum. There are many different types of vacuum pumps, including rotary piston, liquid ring and scroll vacuum pumps. In addition, turbomolecular pumps are used.
Dry vacuum pumps are more expensive than wet vacuum pumps. Wet vacuum pumps use oil as their lubricating fluid. Different types of oils are used depending on the application. Some wet pumps have additional features, including contaminant filtration. However, wet systems have one major disadvantage: the contact between oil and fluid. To avoid this, oil separators are usually used.
There are several different types of vacuum pumps. The basic type is the positive displacement pump. It operates by expanding the chamber and removing gas molecules. The intake valve draws fluid into the chamber, while the exhaust valve opens when the chamber is at maximum expansion. This cycle repeats several times per second. Positive displacement pumps are often used in multistage vacuum systems.
Vacuum Pump

Maintenance of vacuum pump

Regular maintenance is very important to ensure the long-term effective use of the vacuum pump. One way to ensure proper pump performance is to change the oil regularly. Pump oil may be contaminated by vapor condensation. To avoid this problem, close the inlet valve for 20 to 30 minutes before applying vacuum. It is also important to install an inlet cold trap to protect the pump from corrosive vapors.
Another way to prolong the life of your vacuum pump is to periodically remove any solvent in it. This step reduces internal corrosion and prevents premature pump failure. During maintenance, be sure to disconnect the power supply to the vacuum pump. After cleaning, store it in a dry and safe place. The pump should also be disposed of in accordance with local regulations.
Vacuum pumps may require frequent oil changes, especially when used in wet chemistry. The standard rule is to change the oil after 3,000 hours of use, but some pumps require more frequent oil changes. It is also important to clean the oil regularly, as dirty or discolored oil can affect the performance of the pump.
Vacuum pumps are often equipped with on-site glass to allow the user to visually check the oil level. Clean oil will appear transparent, while dirty oil will appear darker. Frequent oil changes are essential, as oil changes can help spot various potential problems. Changes in vacuum pump performance or strange noises are also good indicators of a problem.
After an oil change, the vacuum pump should be cleaned thoroughly with a soft cloth and mild degreaser. Oil changes should take less than ten minutes, and they will extend the life of your equipment. Additionally, the outside of the pump should be wiped with a cloth or rag.
The pump must be properly vented to avoid internal corrosion. If possible, place the pump away from hot equipment or rooms. Overheating can reduce the viscosity of the oil and cause premature pump failure. In addition, it can lead to overwork of other expensive scientific equipment. Heat can also cause cracked rubber parts and oil leaks.
Vacuum Pump

Signs of damage to the vacuum pump

A bad vacuum pump can cause a variety of automotive problems, including poor fuel economy, difficult braking, undercarriage oil leaks, and faulty air conditioning. If any of these problems occur, call a mechanic to check your vehicle’s vacuum pump. You can also check the air conditioner and brake pedal to see if they are working properly.
A loud noise from the pump can also be a symptom of a malfunction. These noises are often caused by the aging and accumulated wear of specific components. If this is the case, the diaphragm, valve plate or seals may need to be replaced. However, if the noise is coming from bearings or other areas, more extensive repairs may be required. Additionally, dust and other contaminants can enter the pump chamber, which can degrade pump performance.
If the vacuum pump won’t start, it could be a blown fuse or a power or voltage problem. Other common causes are flow restrictions or improper installation at the entrance. Also, the vacuum pump may be damaged or the capacitors may be of poor quality. It’s not always easy to tell if a vacuum pump is leaking oil, but a greasy transmission can indicate a vacuum pump failure.
A leaking vacuum pump can also hiss when the car’s engine is running. If you hear it, check the hoses and connections to make sure there are no leaks. A vacuum leak may indicate a faulty vacuum pump, so you need to replace it as soon as possible.
Checking end pressure is easy, but a pressure gauge can also serve as a sign. You can also check for pump vibration by running a short procedure. Excessive vibration can be subtle, but it can greatly affect your process. If you notice excessive pump vibration, you should contact a professional immediately.
Poor pump performance can cause many problems for your company. A bad vacuum pump not only wastes material, it also damages your tools and reputation.

China Best Sales KCB Gear Oil Cast Steel Two Stage Water Ring Vacuum Pump   vacuum pump for ac	China Best Sales KCB Gear Oil Cast Steel Two Stage Water Ring Vacuum Pump   vacuum pump for ac
editor by Dream 2024-04-19


Leave a Reply

Your email address will not be published. Required fields are marked *