planetary gearbox for servo motor

The equipment boxes are constructed with stainless, except from the input flanges which are constructed of anodized aluminum. Safety class IP65 is standard – IP67 offered as choice – which is acheived using a patented insight sealing and a patented result sealing system.
Standard backlash is just 5 respectively 7 arc-minute (1 resp. 2 stages), reduced backlash is merely 3 / 5 arc-min (choice) and finally micro backlash is only 1 / 31 / 3 arc-min (option).
This means that the actual backlash at a particular load is a lot Reduced an APEX gear box than in virtually any other planetary gear box in the marketplace.
Gearboxes provide planetary gearbox for servo motor torque multiplication, speed decrease, and inertia matching for motor-driven systems. Servo systems, specifically, require gearboxes that may supply not merely high torque with low added inertia, but also high precision and stiffness. One kind of gearbox meets all these requirements while providing relatively long operating life with zero-maintenance requirements: the planetary gearbox.
A planetary gearbox consists of multiple planetary gears that revolve around a central sun gear while engaging with an internal gear and rotating by themselves axes. The continuous engagement of the planetary gears means the load is usually shared by multiple tooth, allowing planetary styles to transmit high torque loads.
This load sharing among teeth also gives planetary gearboxes high torsional stiffness, making them well suited for processes that involve frequent start-stop motions or changes in rotational direction, which are common characteristics of servo applications. Most servo applications also require very precise positioning, and planetary gearboxes are designed and manufactured to possess low backlash, with less than 1-2 arcmin in some cases.
Planetary gearboxes can use spur or helical gears. While spur gears can have got higher torque rankings than helical gears, helical styles have smoother operation, less sound, and higher stiffness, producing helical planetary gearboxes the preferred gearbox for servo applications.
When a gearbox is put into the drivetrain, the rotational quickness delivered from the motor to the driven element is reduced by the amount of the equipment ratio, which can allow the program to make better utilization of the servo motor’s speed-torque characteristics. Planetary gearboxes can accept very high input speeds and offer speed reduction of up to 10:1 for standard designs, with high-speed styles providing gear ratios (and, therefore, rate reduction) of 100:1 or higher.
Planetary gearboxes can be lubricated with either grease or oil, although a planetary gearbox for servo use (sometimes known as a “servo rated” or “servo” gearbox) is frequently lubricated with grease. In either case – grease or oil lubrication – planetary gearboxes tend to be lubricated for the life of the gearbox by the product manufacturer, which eliminates maintenance for the end user.
The most important advantage of using a gearbox in a servo system is arguably its effect on the inertia of the load. The load inertia, which is certainly reflected to the motor, is reduced by the sq . of the gear ratio. So a good relatively small gear decrease can have a substantial influence on the inertia ratio.
A right angle planetary gearbox with output shaft combines the advantages of a compact correct angle gearbox and the ones of a typical planetary gearbox.

With its versatile installation options, our right angle gearboxes offer intelligent drive solutions with a compact machine concept. The result shaft gives correct angle planetary gearboxes the benefit of a proven and dependable component for the right angle transmitting of torque and rate.